9095-10129-080 (adhesive) QuickSeal Foil PCR

9095-10129-080 (adhesive) QuickSeal Foil PCR

QuickSeal Foil PCR (adhesive seals)

An adhesive, foil barrier film which is suited for PCR use. Manufactured from soft aluminium foil with acrylic adhesive. The seal has solvent resistance and can be removed, leaving behind no adhesive residue.

9095-10129-080LRQuickSeal Foil PCRRoll200M x 80mm
9095-10129-080SRQuickSeal Foil PCR - SterileRoll200M x 80mm
9095-10129-080LSQuickSeal Foil PCR100 sheets130mm x 80mm
9095-10129-080SSQuickSeal Foil PCR - Sterile100 sheets130mm x 80mm
9095-10129-080TSQuickSeal Foil PCR5 sheets130mm x 80mm

Polypropylene (PP), Polyethylene (PE), Polystyrene (PS), Cyclo Olefin Copolymer (COC).

PCR and sample storage.

Store in a cool place. Avoid direct exposure to sunlight. It is recommended to use the seals within three years from date of purchase. Three years when stored at 21℃ (70℉), 50% relative humidity, out of direct sunlight, in original packaging.

Temperature range -40℃ to 120℃.

Recommended sealing equipment: Ultraseal COLD-PRO.

Visual Description

Thin, Metallic, Reflective, White Liner.

Physical Properties
Secures well at room temperature while conforming well to irregular surfaces and is suitable for use protecting materials quickly or at high temperature (180℃). Temperature Range: -40℃ to +120℃.

Mass Loss

Confirming the materials ability to resist high temperatures. Results: Pass.
Details: Mass loss of solution evaluated after 30 cycles of 3 step PCR Programme. Equipment: ABI Thermocycler, Precision Balance.

Measuring the force required to push a standardised needle through the material via compression measuring equipment. Results: N/A.
Details 5 tests run using a standardised needle, ensuring that less than 10N is required to pierce the surface & access the wells. Equipment Instron 3343 Tensometer.

Determining the materials optical clarity by measuring the transmission of emissive dye through the material. Results Pass.
Details Record the light transmission of a sealed microplate using a Flurophore dye stock solution and a microplate reader. Equipment BMG Labtech - FluroStar.

Measuring the materials permanence of adhesion & its ability to be removed, via extension measuring equipment. Results: Pass.
Details Cohesive Failure, Adhesive Transfer, Material tear & Successful Peel are measured & recorded after a 180℃ peel test. Equipment Instron 3343 Tensometer.

Low Temperature Seal Test
Confirming the materials ability to breath. Results: Pass.
Details: Microplates are sealed at specified low temperatures & subjected to a series of tests to substantiate seal integrity. Equipment: Laboratory Cold storage unit.

Evaluating the materials resistance to solvents (DMSO used as an aggressive standard). Results: N/A.
Details: Sealed plate is subjected to a high concentration of DMSO for a time period at low temperatures after which seal damage & volume loss are determined. Equipment Laboratory Cold storage unit, DMSO solution.

Plate Types
Polypropylene (PP), Polyethylene (PE), Polystyrene (PS), Cyclo Olefin Copolymer (COC).

QC testing is carried out to ensure that products are free from nucleases (DNases & RNases) as well as human genomic DNA. Although every effort is made, including cleanroom manufacture, to maintain this level of cleanliness, best laboratory practice with regards to duplicate testing should be followed.

Kbio back button