Adhesive Crystallography 9095-10103-100M

Description
Optically clear adhesive film, pressure activated adhesive, suitable for qPCR and other imaging techniques including crystaqllisation.
Code | Description | Quantity | Size |
---|---|---|---|
9095-10103-100M | LabRoll | 1 roll | 80mm x 100M |
Application
qPCR.
High degree of optical clarity for ease of read through.
Little or no auto-fluorescence for a high degree of light transmission.
Chemically inert extractables except at extreme pH.
Adheres well to a wide range of substrates.
Storage
Room temperature. Avoid direct exposure to light and high humidity.
Sealing
For all adhesive seals the best sealing results are achieved using a hand-held pressure roller.
Properties
Temperature range -80˚C to 110˚C with pressurised heated PCR Lid.
Composition
Polyolefin film with pressure sensitive silicone adhesive and coated polyester film release liner. Non-tacky to skin and gloves.
Safety
Non-hazardous. This is a pressure seal. The adhesive is released when pressure is applied firmly and evenly to the seal.
Schematic
ADD DIAGRAM
Note
Non-hazardous. This is a pressure seal. The adhesive is released when pressure is applied firmly and evenly to the seal.
QC testing is carried out to ensure that products are free from nucleases (DNases & RNases) as well as human genomic DNA. Although every effort is made, including cleanroom manufacture, to maintain this level of cleanliness, best laboratory practice with regards to duplicate testing should be followed.
qPCR.
High degree of optical clarity for ease of read through.
Little or no auto-fluorescence for a high degree of light transmission.
Chemically inert extractables except at extreme pH.
Adheres well to a wide range of substrates.
Storage
Room temperature. Avoid direct exposure to light and high humidity.
Sealing
For all adhesive seals the best sealing results are achieved using a hand-held pressure roller.
Properties
Temperature range -80˚C to 110˚C with pressurised heated PCR Lid.
Composition
Polyolefin film with pressure sensitive silicone adhesive and coated polyester film release liner. Non-tacky to skin and gloves.
Safety
Non-hazardous. This is a pressure seal. The adhesive is released when pressure is applied firmly and evenly to the seal.
Schematic
ADD DIAGRAM
Note
Non-hazardous. This is a pressure seal. The adhesive is released when pressure is applied firmly and evenly to the seal.
QC testing is carried out to ensure that products are free from nucleases (DNases & RNases) as well as human genomic DNA. Although every effort is made, including cleanroom manufacture, to maintain this level of cleanliness, best laboratory practice with regards to duplicate testing should be followed.